SZ-326F CNC Swiss type Automatic lathe
Brief Description of Model SZ-326F :
1. Origin: Shenzhen, China
2. Certification: CE
3. Max Machining bar diameter: Φ32mm
4. Dual spindles
5. Main spindle: HAOZHI (China)
6. FANUC 0i-TF Plus system (Japan)
7. Accuracy: 0.01mm (Depend on the workpieces)
8. Electrical components: Schneider
9. X1 travel:110mm, X2 travel:325mm,Y1 travel:500mm,Y2 travel:145mm, Z1 travel:320mm,Z2 travel:360mm
SZ-326F CNC Swiss type automatic lathe Technical specifications |
||||
Cutting-tool layout sketch |
6 axis, dual spindles
|
|||
NC device |
FANUC 0i-TF Plus |
|||
Power source |
200VAC |
|||
Lathe rated power |
Kw |
20 |
||
Machining range |
Machining range dia. |
mm |
Φ32 |
|
Main spindle max clamping dia. |
mm |
Φ32 |
||
Max feed length (once) |
mm |
Max 320 |
||
Main/sub spindle |
Main spindle power |
Kw |
5.5/7.5 |
|
Sub spindle power |
Kw |
3.7/5.5 |
||
Main spindle max through hole dia. |
mm |
Max Φ39 |
||
C axis resolution |
° |
C1/C2 0.001° |
||
Main/sub spindle rev speed |
rpm |
Max 6000 |
||
Sub spindle max clamping dia. |
mm |
Max Φ32 |
||
Sub spindle max through hole dia. |
mm |
Max Φ39 |
||
Main spindle max travel |
With guide bush |
mm |
320 |
|
Non guide bush |
mm |
80 |
||
Max tool installed qty. |
pcs |
31 |
||
OD Turning tool |
Qty.×Model |
6×□16 |
||
Cross live tool |
Qty.×Model |
5×ER16+1×ER20 |
||
Drilling dia. |
mm |
Max Φ13 |
||
Tapping/Threading die dia. |
Max M8 |
|||
Live tool rev speed |
rpm |
Max 4500 |
||
Live tool power |
Kw |
1.2 |
End-face tool (Main spindle) |
Fixed |
Qty.×Model |
7×ER16 |
||
Drilling dia. |
mm |
Max Φ10 |
|||
Tapping/Threading die dia. |
Max M8 |
||||
Back end-face tool |
Fixed |
Qty.×Model |
3×ER16 |
||
Drilling dia. |
mm |
Max φ10 |
|||
Tapping/Threading die dia. |
Max M8 |
||||
Live |
Back end face tool |
Qty.×Model |
3×ER16 |
||
Back end face cross live tool |
Qty.×Model |
3×ER16 |
|||
Drilling dia. |
Max Φ10 |
||||
Tapping/Threading die dia. |
Max M8 |
||||
Live tool rev speed |
Max 4500 |
||||
Live tool power |
1.2 |
||||
OD Turning tool |
3×□12 |
||||
Motor driven synchronous rotary guide bush |
Kw |
1 |
|||
Rapid feed speed |
m/min |
24(Z1/Z2/X2/X1/Y1/Y2) |
|||
Feed motor power |
Kw |
1.2(Z1/Z2/X1/X2/Y1/Y2) |
|||
Cutting oil pump power |
Kw |
0.4 |
|||
Main/sub spindle cooling oil pump power |
Kw |
1.2 |
|||
Lubricating oil pump power |
Kw |
0.25 |
|||
Max collecting length of workpieces collect box |
mm |
80 |
|||
Main/sub spindle center to the bottom of lathe body |
mm |
1100 |
|||
Cutting oil tank volume |
L |
190 |
|||
Air source pressure |
Mpa |
≧0.5 |
|||
Net weight |
Kg |
4500 |
|||
Dimensions(L×W×H) |
mm |
2850×1600×2050 |
Japan FANUC 0i-TF Plus control system |
10.4 inch Color LCD display |
Main/sub spindle cooling system |
Lubricating system |
Rotatory guide bush |
Main/sub spindle air blowing device |
LED working light |
Electric leakage protection |
Transformer |
External light connector |
3-color tower light |
HIWIN/PMI screw/guide rail, Class 3 |
Cutting oil tank |
Main/sub spindle collet 3 pcs; guide bush 3 pcs |
Tool cabinet |
|
|
Automatic bar feeder Automatically feed, when a bar material is used up, the new bar can be automatically replace d |
Chip conveyor(Chain type) High conveying efficiency and large selection range of conveying speed.The structure of the chain plate is a new type of articulated multi-spherical chain plate. Small and light chips are not easily attached to the chain plate. |
|
|
Oil mist collector To collect the oil mist that produced in the processing area, usually accompany with a high-pressure pump
|
High pressure pump It’s used to extremely difficult workpiece processing, such as aluminum, red copper, stainless steel, ect. To improve the cooling effect and change processing chip shape. High pressure pump can be selected according to the actual requirement; usually it has 100 and 150 bar. |
|
|
Workpiece belt conveyor The finished workpiece can be transmitted from this belt conveyor |
Cut-off tool breakage detector The cut-off tool breakage can be detected when it breaks accidentally |
SZ-326F Lathe Introduction
F series CNC Swiss type lathe characters:
New product series, new design, new structure
Ø Multiple simultaneous processing, efficient production
Modular tool layout, complete turning-milling compound processing capability on the sub spindle, maximize the optimization of processing technology, shorten the processing time.
Ø In total 35 pcs cutting tools:
Main spindle= 6X□12 + 6XER16 + 7XER16
Sub spindle=4X□12 + 4XER16 + 4XER16 + 4XER16
High rigidity guideway structure
Y axis guideway structure use 3 pcs C3 grade PMI/HIWIN guide rails increase the cutting tool rigidity.
Guide bush and non-guide bush switching function
With or without guide bush is flexible exchange
Oil cooling spindle
The build-in main and sub spindles are cooling by oil. The oil is cooled by oil chiller. The spindle compact structure, light weight, low inertia, low noise, fast response, easy to achieve positioning
New designed lathe body,
With the help of finite element analysis (FEA), the optimization design not only meet the requirements of high rigidity and high precision machining, but also obvious effects in absorbing vibration and reducing resonance
FANUC new control system: FANUC 0i-TF Plus
SZ-326F lathe design structure